Upgrade the rear of your C8 Corvette Stingray with this ZR1 ZTK Style Carbon Fiber Rear Spoiler, featuring an aggressive track-inspired profile and exposed gloss carbon fiber construction.
Choose between two mounting configurations depending on your vehicle and desired installation: Bumper Mount with Hole-Covering Base or OEM-Style Chassis Mount.
Features
- Gloss carbon fiber construction
- ZR1 ZTK-inspired design
- 1-piece rear wing
- UV-resistant gloss clear coat
- Exposed carbon fiber weave
- Lightweight construction
- Two mounting configurations available
- Covers factory spoiler holes when using the Bumper Mount option
- OEM-style rigid installation available with Chassis Mount option
Mounting Options
| Mounting Option |
Bumper Mount + Hole-Covering Base |
OEM-Style Chassis Mount |
| Mounting Location |
Factory spoiler mounting points |
Vehicle body / chassis |
| Cutting Required |
No |
Yes – bumper clearance required |
| Drilling Required |
No |
Yes – body must be drilled |
| Covers OEM Spoiler Holes |
Yes |
No |
| Installation |
Plug-and-play |
Advanced / professional |
| Recommended Speed Rating |
Up to 150 MPH |
Up to 200 MPH |
| Best For |
Cars with an existing OEM spoiler |
Maximum rigidity / OEM-style installation |
Bumper Mount + Hole-Covering Base
The Bumper Mount System is the easiest and most practical option, especially for C8 Stingrays that already have a factory spoiler.
The included full mounting base installs directly into the existing OEM spoiler mounting holes. No cutting or additional drilling is required. The factory mounting points secure the base while the larger footprint simultaneously covers the holes left behind by the original spoiler.
This makes the system essentially plug-and-play and eliminates the need for bodywork, hole filling, or repainting.
The Bumper Mount configuration is rated for speeds of up to 150 MPH when properly installed and maintained.
Recommended for vehicles with an existing OEM spoiler and customers wanting the cleanest installation with no permanent modification.
OEM-Style Chassis Mount
The OEM-Style Chassis Mount System is the more rigid and professional mounting solution. Rather than relying on the rear bumper as the primary support, the brackets pass through the bumper and secure directly to the vehicle body/chassis.
Installation is considerably more involved. The rear bumper must be cut to provide clearance for the chassis brackets, and mounting locations must be drilled into the vehicle body to properly secure the system.
This creates a substantially more rigid mounting structure and more closely replicates the way an OEM-style high-performance wing is supported.
The Chassis Mount configuration is rated for speeds of up to 200+ MPH when properly installed and maintained.
This option is best suited for vehicles that did not originally have a rear spoiler, since there are no existing spoiler holes to address. It can still be installed on vehicles previously equipped with an OEM spoiler, but the chassis-mount system itself does not cover the original spoiler holes. Optional carbon fiber hole covers may be purchased separately, or the holes can be professionally filled and refinished by a body shop.
Professional installation is strongly recommended for the Chassis Mount configuration.
Vehicle Fitment
Fits 2020–2026 Chevrolet Corvette C8 Stingray:
Important Safety & Maintenance
Due to the aerodynamic forces placed on a rear wing at higher speeds, all mounting hardware should be inspected regularly to ensure the wing, brackets, and fasteners remain properly secured.
The use of an appropriate thread-locking compound such as Loctite is recommended on applicable mounting hardware to help prevent fasteners from loosening due to vibration and repeated aerodynamic loading.
The stated 150 MPH Bumper Mount and 200 MPH Chassis Mount ratings assume proper installation and should not be interpreted as a guarantee of safe vehicle operation at those speeds. Vehicle condition, installation quality, road or track conditions, and other factors can affect safety.
What's Included
Bumper Mount Configuration
- (1) ZR1 ZTK Style Gloss Carbon Fiber Rear Spoiler
- Bumper mounting system
- Full hole-covering base
- Required mounting hardware
OEM-Style Chassis Mount Configuration
- (1) ZR1 ZTK Style Gloss Carbon Fiber Rear Spoiler
- OEM-style chassis mounting brackets
- Required mounting hardware
Optional carbon fiber factory spoiler hole covers are sold separately for Chassis Mount installations.
